Home > Products
Select a category from the below list:
Crankshafts Pistons Balancers
Roller Lifters Pushrods Rocker Arms - Shaft Mount
Timing Chain Sets Timing Belt Drive Systems Valves
Valve Springs
Sort By:
Page of 34
ARP-300-8303 - Nut - 12 point - 7/16"-20 ARP-300-8303 - Nut - 12 point - 7/16"-20 RH thread - 1/2" wrench - 150,000 PSI

ARP-300-8303 - Nut - 12 point - 7/16"-20 RH thread - 1/2" wrench - 150,000 PSI

Our Price: $2.49
ARP-P7 AP 1.00-1C - Stand Bolt -  12 point - 7/16"-14 RH thread - 1.000" UHL - 3/4" wrench - 180,000 PSI ARP-P7 AP 1.00-1C - Stand Bolt - 12 point - 7/16"-14 RH thread - 1.000" UHL - 3/4" wrench - 180,000 PSI

ARP-P7 AP 1.00-1C - Stand Bolt -  12 point - 7/16"-14 RH thread - 1.000" UHL - 3/4" wrench - 180,000 PSI

Our Price: $2.99
Manton 102 Series 1 Pushrod Manton 102 3/8" x .058" Wall Straight Pushrod

The Manton 102 Series 1 pushrods are made from 4130/4135 chromoly tubing and provides approximately 140,000 psi tensile strength. Not recommended for use with hardened guide plates or roller camshafts.

Our Price: $8.38
Manton 102-35 Series 1 Pushrod Manton 102-035 3/8" x .035" Wall Straight Pushrod

The Manton 102-035 Series 1 pushrods are made from 4130/4135 chromoly tubing and provides approximately 140,000 psi tensile strength. Not recommended for use with hardened guide plates or roller camshafts.

Our Price: $8.38
Manton 103 Series 1 Pushrod Manton 103 3/16" x .035" Wall Straight Pushrod

The Manton 103 Series 1 pushrods are made from 4130/4135 chromoly tubing and provides approximately 140,000 psi tensile strength. Not recommended for use with hardened guide plates or roller camshafts.

Our Price: $8.38
Manton 104 Series 1 Pushrod Manton 104 1/4" x .049" Wall Straight Pushrod

The Manton 104 Series 1 pushrods are made from 4130/4135 chromoly tubing and provides approximately 140,000 psi tensile strength. Not recommended for use with hardened guide plates or roller camshafts.

Our Price: $8.38
LGM-HDW8805500 - Adjuster Screw - 7/16"-20 thread LGM-HDW8805500 - Adjuster Screw - 7/16"-20 thread

- 7/16"-20 thread
- 1.250" length
- 3/16" hex key
- Black oxide

Our Price: $8.99
Manton 202 Series 2 Pushrod Manton 202 3/8" x .058" Wall Straight Pushrod

The Manton 202 Series 2 pushrods are made from 4130/4135 chromoly tubing and provides approximately 150,000 psi tensile strength. They are Melonite TM processed for use with guide plates.

Our Price: $9.23
Manton 301 Series 3 Pushrod Manton 301 5/16" x .083" Wall Straight Pushrod

The Manton 301 Series 3 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing and provides approximately 170,000 psi tensile strength. Not recommended for use with hardened guide plates.

Our Price: $9.94
Manton 301-118 Series 3 Pushrod Manton 301-118 5/16" x .118" Wall Straight Pushrod

The Manton 301-118 Series 3 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing and provides approximately 170,000 psi tensile strength. Not recommended for use with hardened guide plates.

Our Price: $11.36
Manton 401 Series 4 Pushrod Manton 401 5/16" x .083" Wall Straight Pushrod

The Manton 401 Series 4 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing and provides approximately 170,000 psi tensile strength. They are Melonite TM processed for use with guide plates.

Our Price: $11.36
Manton 304 Series 3 Pushrod Manton 304 3/8" x .095" Wall Straight Pushrod

The Manton 304 Series 3 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing and provides approximately 170,000 psi tensile strength. Not recommended for use with hardened guide plates.

Our Price: $11.51
ROL-S1712 Rollmaster - Shim ROL-S1712 Rollmaster - Shim

Rollmaster - Shim

Our Price: $11.99
ROL-S1712W Rollmaster - Shim ROL-S1712W Rollmaster - Shim

Rollmaster - Shim

Our Price: $11.99
ROL-S1880 Rollmaster - Shim ROL-S1880 Rollmaster - Shim

Rollmaster - Shim

Our Price: $11.99
ROL-S1955 Rollmaster - Shim ROL-S1955 Rollmaster - Shim

Rollmaster - Shim

Our Price: $11.99
Manton 404 Series 4 Pushrod Manton 404 3/8" x .095" Wall Straight Pushrod

The Manton 404 Series 4 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing and provides approximately 170,000 psi tensile strength. They are Melonite TM processed for use with guide plates.

Our Price: $12.07
Manton 305 Series 3 Pushrod Manton 305 7/16" x .120" Wall Straight Pushrod

The Manton 305 Series 3 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing and provides approximately 170,000 psi tensile strength. Not recommended for use with hardened guide plates.

Our Price: $12.78
Manton 302 Series 3 Pushrod Manton 302 11/32" x .120" Wall Straight Pushrod

The Manton 302 Series 3 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing and provides approximately 170,000 psi tensile strength. Not recommended for use with hardened guide plates.

Our Price: $12.84
Manton 304-120 Series 3 Pushrod Manton 304-120 3/8" x .120" Wall Straight Pushrod

The Manton 304-120 Series 3 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing and provides approximately 170,000 psi tensile strength. Not recommended for use with hardened guide plates.

Our Price: $13.06
Manton 402 Series 4 Pushrod Manton 402 11/32" x .120" Wall Straight Pushrod

The Manton 402 Series 4 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing and provides approximately 170,000 psi tensile strength. They are Melonite TM processed for use with guide plates.

Our Price: $13.52
Manton 404-120 Series 4 Pushrod Manton 404-120 3/8" x .120" Wall Straight Pushrod

The Manton 404-120 Series 4 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing and provides approximately 170,000 psi tensile strength. They are Melonite TM processed for use with guide plates.

Our Price: $14.20
Manton 405 Series 4 Pushrod Manton 405 7/16" x .120" Wall Straight Pushrod

The Manton 405 Series 4 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing and provides approximately 170,000 psi tensile strength. They are Melonite TM processed for use with guide plates.

Our Price: $14.20
Manton 501 Series 5 Pushrod Manton 501 5/16" x .083" Wall Straight Pushrod

The Manton 501 Series 5 pushrods are made from 4130/4135 seamless chromoly tubing using proprietary heat treating techniques to achieve a 275,000 psi tensile strength without becoming brittle.

Our Price: $14.20
Manton 401-118 Series 4 Pushrod Manton 401-118 5/16" x .118" Wall Straight Pushrod

The Manton 401-118 Series 4 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing and provides approximately 170,000 psi tensile strength. They are Melonite TM processed for use with guide plates.

Our Price: $14.33
Innovators West 6019 Innovators West 6019 - BBF/SBF Hardened Camshaft Pin

BBF/SBF Hardened Camshaft Pin

Our Price: $14.99
Manton 305-168 Series 3 Pushrod Manton 305-168 7/16" x .168" Wall Straight Pushrod

The Manton 305-168 Series 3 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing and provides approximately 170,000 psi tensile strength. Not recommended for use with hardened guide plates.

Our Price: $15.57
Manton 306 Series 3 Pushrod Manton 306 1/2" x .120" Wall Straight Pushrod

The Manton 306 Series 3 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing and provides approximately 170,000 psi tensile strength. Not recommended for use with hardened guide plates.

Our Price: $15.57
Manton 304-145 Series 3 Pushrod Manton 304-145 3/8" x .145" Wall Straight Pushrod

The Manton 304-145 Series 3 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing and provides approximately 170,000 psi tensile strength. Not recommended for use with hardened guide plates.

Our Price: $15.59
Manton 404-145 Series 4 Pushrod Manton 404-145 3/8" x .145" Wall Straight Pushrod

The Manton 404-145 Series 4 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing and provides approximately 170,000 psi tensile strength. They are Melonite TM processed for use with guide plates.

Our Price: $15.97