Street Performance - SBC - .842 Diameter - Hydraulic Roller
The Street Performance Hydraulic Lifters are made from a cold formed body with a clipped axle and have 6500 RPM capability. These lifters have .120 plunger travel and have an 80% fill rate with the test oil. Recommended Spring Pressures are 100-180 lbs Seat Pressure and 280-380 lbs Open Pressure
Street Performance - LS - .842 Diameter - Hydraulic Roller
The Street Performance Hydraulic Lifters are made from a cold formed body with a clipped axle and have 6500 RPM capability. These lifters have .120 plunger travel and have an 80% fill rate with the test oil. Recommended Spring Pressures are 100-180 lbs Seat Pressure and 280-380 lbs Open Pressure
Street Performance - LS - .842 Diameter - Hydraulic Roller
The Street Performance Hydraulic Lifters are made from a cold formed body with a clipped axle and have 6500 RPM capability. These lifters have .120 plunger travel and have an 80% fill rate with the test oil. Recommended Spring Pressures are 100-180 lbs Seat Pressure and 280-380 lbs Open Pressure
Street Performance - SBC - .842 Diameter - Hydraulic Roller
The Street Performance Hydraulic Lifters are made from a cold formed body with a clipped axle and have 6500 RPM capability. These lifters have .120 plunger travel and have an 80% fill rate with the test oil. Recommended Spring Pressures are 100-180 lbs Seat Pressure and 280-380 lbs Open Pressure
Street Performance - Mopar BB - .903 Diameter - Hydraulic Roller
The Street Performance Hydraulic Lifters are made from a cold formed body with a clipped axle and have 6500 RPM capability. These lifters have .120 plunger travel and have an 80% fill rate with the test oil. Recommended Spring Pressures are 100-180 lbs Seat Pressure and 280-380 lbs Open Pressure
Street Performance - Pontiac - .842 Diameter - Hydraulic Roller
The Street Performance Hydraulic Lifters are made from a cold formed body with a clipped axle and have 6500 RPM capability. These lifters have .120 plunger travel and have an 80% fill rate with the test oil. Recommended Spring Pressures are 100-180 lbs Seat Pressure and 280-380 lbs Open Pressure
Street Performance - BBC - .842 Diameter - Hydraulic Roller
The Street Performance Hydraulic Lifters are made from a cold formed body with a clipped axle and have 6500 RPM capability. These lifters have .120 plunger travel and have an 80% fill rate with the test oil. Recommended Spring Pressures are 100-180 lbs Seat Pressure and 280-380 lbs Open Pressure
Street Performance - Mopar SB - .903 Diameter - Hydraulic Roller
The Street Performance Hydraulic Lifters are made from a cold formed body with a clipped axle and have 6500 RPM capability. These lifters have .120 plunger travel and have an 80% fill rate with the test oil. Recommended Spring Pressures are 100-180 lbs Seat Pressure and 280-380 lbs Open Pressure
Street Performance - Viper V10 - .842 Diameter - Hydraulic Roller
The Street Performance Hydraulic Lifters are made from a cold formed body with a clipped axle and have 6500 RPM capability. These lifters have .120 plunger travel and have an 80% fill rate with the test oil. Recommended Spring Pressures are 100-180 lbs Seat Pressure and 280-380 lbs Open Pressure
HLT - SBF Windsor/Cleveland - .875 Diameter - Hydraulic Roller
The HLT roller lifters, also known as Limited Travel lifters, have a clipped axle and are intended for use in Stock Racing Classes where some plunger travel is required. These lifters have between .015-.030 plunger travel before going solid. Due to the short plunger travel on these lifters there is some Valve Train Noise that can be associated with them.
HLT - BBF 429-460 & FE 352-390-410-428 - .875 Diameter - Hydraulic Roller
The HLT roller lifters, also known as Limited Travel lifters, have a clipped axle and are intended for use in Stock Racing Classes where some plunger travel is required. These lifters have between .015-.030 plunger travel before going solid. Due to the short plunger travel on these lifters there is some Valve Train Noise that can be associated with them.
HLT - LS - .842 Diameter - Hydraulic Roller - Standard & High Lift
The HLT roller lifters, also known as Limited Travel lifters, have a clipped axle and are intended for use in Stock Racing Classes where some plunger travel is required. These lifters have between .015-.030 plunger travel before going solid. Due to the short plunger travel on these lifters there is some Valve Train Noise that can be associated with them.
Hi-RPM - SBC - .842 Diameter - Hydraulic Roller
The Hi-RPM Hydraulic Lifters are made from a billet body and have a clipped axle. These lifters have 7000+ RPM capability with .120 plunger travel and have an 80% fill rate with the test oil. The Internal tolerances are much tighter in this series. Do Not Use Oil Heavier Than 5W40!
Hi-RPM - LS - .842 Diameter - Hydraulic Roller
The Hi-RPM Hydraulic Lifters are made from a billet body and have a clipped axle. These lifters have 7000+ RPM capability with .120 plunger travel and have an 80% fill rate with the test oil. The Internal tolerances are much tighter in this series. Do Not Use Oil Heavier Than 5W40!
Hi-RPM - Pontiac - .842 Diameter - Hydraulic Roller
The Hi-RPM Hydraulic Lifters are made from a billet body and have a clipped axle. These lifters have 7000+ RPM capability with .120 plunger travel and have an 80% fill rate with the test oil. The Internal tolerances are much tighter in this series. Do Not Use Oil Heavier Than 5W40!
HLT - LS - .842 Diameter - Hydraulic Roller
The HLT roller lifters, also known as Limited Travel lifters, have a clipped axle and are intended for use in Stock Racing Classes where some plunger travel is required. These lifters have between .015-.030 plunger travel before going solid. Due to the short plunger travel on these lifters there is some Valve Train Noise that can be associated with them.
HLT - SBC - .842 Diameter - Hydraulic Roller
The HLT roller lifters, also known as Limited Travel lifters, have a clipped axle and are intended for use in Stock Racing Classes where some plunger travel is required. These lifters have between .015-.030 plunger travel before going solid. Due to the short plunger travel on these lifters there is some Valve Train Noise that can be associated with them.
Hi-RPM - BBC - .842 Diameter - Hydraulic Roller
The Hi-RPM Hydraulic Lifters are made from a billet body and have a clipped axle. These lifters have 7000+ RPM capability with .120 plunger travel and have an 80% fill rate with the test oil. The Internal tolerances are much tighter in this series. Do Not Use Oil Heavier Than 5W40!
HLT - BBC - .842 Diameter - Hydraulic Roller
The HLT roller lifters, also known as Limited Travel lifters, have a clipped axle and are intended for use in Stock Racing Classes where some plunger travel is required. These lifters have between .015-.030 plunger travel before going solid. Due to the short plunger travel on these lifters there is some Valve Train Noise that can be associated with them.
Hi-RPM - SBF Windsor/Cleveland - .875 Diameter - Hydraulic Roller
The Hi-RPM Hydraulic Lifters are made from a billet body and have a clipped axle. These lifters have 7000+ RPM capability with .120 plunger travel and have an 80% fill rate with the test oil. The Internal tolerances are much tighter in this series. Do Not Use Oil Heavier Than 5W40!
Hi-RPM - BBF 429-460 & FE - .875 Diameter - Hydraulic Roller
The Hi-RPM Hydraulic Lifters are made from a billet body and have a clipped axle. These lifters have 7000+ RPM capability with .120 plunger travel and have an 80% fill rate with the test oil. The Internal tolerances are much tighter in this series. Do Not Use Oil Heavier Than 5W40!
Hi-RPM - BBF 429-460 & FE - .903 Diameter - Hydraulic Roller
The Hi-RPM Hydraulic Lifters are made from a billet body and have a clipped axle. These lifters have 7000+ RPM capability with .120 plunger travel and have an 80% fill rate with the test oil. The Internal tolerances are much tighter in this series. Do Not Use Oil Heavier Than 5W40!
Hi-RPM - SBC - .903 Diameter - Hydraulic Roller - Pressurized Oiling
The Hi-RPM Hydraulic Lifters are made from a billet body and have a clipped axle. These lifters have 7000+ RPM capability with .120 plunger travel and have an 80% fill rate with the test oil. The Internal tolerances are much tighter in this series. Do Not Use Oil Heavier Than 5W40!
