Home > Products > Pushrods > Manton
Select a category from the below list:
Manton Series 1 Pushrods Manton Series 2 Pushrods Manton Series 3 Pushrods
Manton Series 4 Pushrods Manton Series 5 Pushrods

Mantons versatility in engineering, design and manufacturing results in the highest quality and best performing solutions possible. We can create and produce pushrods that stronger, more durable and better performing for your engines needs. All of our products are made from the highest quality materials on earth. Our specific selections of steels are used for their specific characteristics. Manton pushrods are manufactured and designed to enhance your specific engine combination. Because every single engine is different, we do not mass produce any of our products. Manton pushrods are only made custom to order, with an average lead time of only 2 – 48 hours. We feel it is unnecessary to compromise valvetrain geometry by offering off the shelf pushrods.
Sort By:
Page of 4
Manton 102 Series 1 Pushrod Manton 102 - 3/8 x .058 Wall - Straight Pushrod

Manton Series 1 pushrods are made from 4130/4135 chromoly tubing that is much stronger than a stock pushrod and provides approximately 140,000 psi tensile strength. Not recommended for use with hardened guide plates or roller camshafts.

Our Price: $9.10
Manton 102-35 Series 1 Pushrod Manton 102-035 - 3/8 x .035 Wall - Straight Pushrod

Manton Series 1 pushrods are made from 4130/4135 chromoly tubing that is much stronger than a stock pushrod and provides approximately 140,000 psi tensile strength. Not recommended for use with hardened guide plates or roller camshafts.

Our Price: $9.10
Manton 202 Series 2 Pushrod Manton 202 - 3/8 x .058 Wall - Straight Pushrod

Manton Series 2 pushrods are made from 4130/4135 chromoly tubing that is much stronger than a stock pushrod and provides approximately 150,000 psi tensile strength. They are Melonite™ processed for use with guide plates.

Our Price: $9.23
Manton 103 Series 1 Pushrod Manton 103 - 3/16 x .035 Wall - Straight Pushrod

Manton Series 1 pushrods are made from 4130/4135 chromoly tubing that is much stronger than a stock pushrod and provides approximately 140,000 psi tensile strength. Not recommended for use with hardened guide plates or roller camshafts.

Our Price: $9.43
Manton 104 Series 1 Pushrod Manton 104 - 1/4 x .049 Wall - Straight Pushrod

Manton Series 1 pushrods are made from 4130/4135 chromoly tubing that is much stronger than a stock pushrod and provides approximately 140,000 psi tensile strength. Not recommended for use with hardened guide plates or roller camshafts.

Our Price: $9.43
Manton 301 Series 3 Pushrod Manton 301 - 5/16 x .083 Wall - Straight Pushrod

Manton Series 3 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing originally formulated for aerospace/aircraft use, the highest quality available from mills. They are a higher quality pushrod which provides approximately 170,000 psi tensile strength. Not recommended for use with hardened guide plates.

Our Price: $9.94
Manton 401 Series 4 Pushrod Manton 401 - 5/16 x .083 Wall - Straight Pushrod

Manton Series 4 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing originally formulated for aerospace/aircraft use, the highest quality available from mills. They are a higher quality pushrod which provides approximately 170,000 psi tensile strength. They are Melonite™ processed for use with guide plates.

Our Price: $11.36
Manton 301-118 Series 3 Pushrod Manton 301-118 - 5/16 x .118 Wall - Straight Pushrod

Manton Series 3 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing originally formulated for aerospace/aircraft use, the highest quality available from mills. They are a higher quality pushrod which provides approximately 170,000 psi tensile strength. Not recommended for use with hardened guide plates.

Our Price: $11.70
Manton 304 Series 3 Pushrod Manton 304 - 3/8 x .095 Wall - Straight Pushrod

Manton Series 3 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing originally formulated for aerospace/aircraft use, the highest quality available from mills. They are a higher quality pushrod which provides approximately 170,000 psi tensile strength. Not recommended for use with hardened guide plates.

Our Price: $11.74
Manton 404 Series 4 Pushrod Manton 404 - 3/8 x .095 Wall - Straight Pushrod

Manton Series 4 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing originally formulated for aerospace/aircraft use, the highest quality available from mills. They are a higher quality pushrod which provides approximately 170,000 psi tensile strength. They are Melonite™ processed for use with guide plates.

Our Price: $12.77
Manton 305 Series 3 Pushrod Manton 305 - 7/16 x .120 Wall - Straight Pushrod

Manton Series 3 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing originally formulated for aerospace/aircraft use, the highest quality available from mills. They are a higher quality pushrod which provides approximately 170,000 psi tensile strength. Not recommended for use with hardened guide plates.

Our Price: $13.16
Manton 302 Series 3 Pushrod Manton 302 - 11/32 x .120 Wall - Straight Pushrod

Manton Series 3 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing originally formulated for aerospace/aircraft use, the highest quality available from mills. They are a higher quality pushrod which provides approximately 170,000 psi tensile strength. Not recommended for use with hardened guide plates.

Our Price: $13.23
Manton 304-120 Series 3 Pushrod Manton 304-120 - 3/8 x .120 Wall - Straight Pushrod

Manton Series 3 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing originally formulated for aerospace/aircraft use, the highest quality available from mills. They are a higher quality pushrod which provides approximately 170,000 psi tensile strength. Not recommended for use with hardened guide plates.

Our Price: $13.46
Manton 404-120 Series 4 Pushrod Manton 404-120 - 3/8 x .120 Wall - Straight Pushrod

Manton Series 4 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing originally formulated for aerospace/aircraft use, the highest quality available from mills. They are a higher quality pushrod which provides approximately 170,000 psi tensile strength. They are Melonite™ processed for use with guide plates.

Our Price: $14.20
Manton 402 Series 4 Pushrod Manton 402 - 11/32 x .120 Wall - Straight Pushrod

Manton Series 4 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing originally formulated for aerospace/aircraft use, the highest quality available from mills. They are a higher quality pushrod which provides approximately 170,000 psi tensile strength. They are Melonite™ processed for use with guide plates.

Our Price: $14.30
Manton 401-118 Series 4 Pushrod Manton 401-118 - 5/16 x .118 Wall - Straight Pushrod

Manton Series 4 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing originally formulated for aerospace/aircraft use, the highest quality available from mills. They are a higher quality pushrod which provides approximately 170,000 psi tensile strength. They are Melonite™ processed for use with guide plates.

Our Price: $14.33
Manton 501 Series 5 Pushrod Manton 501 - 5/16 x .083 Wall - Straight Pushrod

Manton Series 5 pushrods are made from 4130/4135 seamless chromoly tubing using proprietary heat treating techniques to achieve a 275,000 psi tensile strength without becoming brittle.

Our Price: $14.62
Manton 405 Series 4 Pushrod Manton 405 - 7/16 x .120 Wall - Straight Pushrod

Manton Series 4 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing originally formulated for aerospace/aircraft use, the highest quality available from mills. They are a higher quality pushrod which provides approximately 170,000 psi tensile strength. They are Melonite™ processed for use with guide plates.

Our Price: $15.02
Manton 304-145 Series 3 Pushrod Manton 304-145 - 3/8 x .145 Wall - Straight Pushrod

Manton Series 3 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing originally formulated for aerospace/aircraft use, the highest quality available from mills. They are a higher quality pushrod which provides approximately 170,000 psi tensile strength. Not recommended for use with hardened guide plates.

Our Price: $15.59
Manton 305-168 Series 3 Pushrod Manton 305-168 - 7/16 x .168 Wall - Straight Pushrod

Manton Series 3 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing originally formulated for aerospace/aircraft use, the highest quality available from mills. They are a higher quality pushrod which provides approximately 170,000 psi tensile strength. Not recommended for use with hardened guide plates.

Our Price: $16.04
Manton 404-145 Series 4 Pushrod Manton 404-145 - 3/8 x .145 Wall - Straight Pushrod

Manton Series 4 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing originally formulated for aerospace/aircraft use, the highest quality available from mills. They are a higher quality pushrod which provides approximately 170,000 psi tensile strength. They are Melonite™ processed for use with guide plates.

Our Price: $16.89
Manton 405-168 Series 4 Pushrod Manton 405-168 - 7/16 x .168 Wall - Straight Pushrod

Manton Series 4 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing originally formulated for aerospace/aircraft use, the highest quality available from mills. They are a higher quality pushrod which provides approximately 170,000 psi tensile strength. They are Melonite™ processed for use with guide plates.

Our Price: $16.89
Manton 501-118 Series 5 Pushrod Manton 501-118 - 5/16 x .118 Wall - Straight Pushrod

Manton Series 5 pushrods are made from 4130/4135 seamless chromoly tubing using proprietary heat treating techniques to achieve a 275,000 psi tensile strength without becoming brittle.

Our Price: $17.39
Manton 502 Series 5 Pushrod Manton 502 - 11/32 x .120 Wall - Straight Pushrod

Manton Series 5 pushrods are made from 4130/4135 seamless chromoly tubing using proprietary heat treating techniques to achieve a 275,000 psi tensile strength without becoming brittle.

Our Price: $17.39
Manton 503 Series 5 Pushrod Manton 503 - 3/8 x .095 Wall - Straight Pushrod

Manton Series 5 pushrods are made from 4130/4135 seamless chromoly tubing using proprietary heat treating techniques to achieve a 275,000 psi tensile strength without becoming brittle.

Our Price: $17.39
Manton 503-120 Series 5 Pushrod Manton 503-120 - 3/8 x .120 Wall - Straight Pushrod

Manton Series 5 pushrods are made from 4130/4135 seamless chromoly tubing using proprietary heat treating techniques to achieve a 275,000 psi tensile strength without becoming brittle.

Our Price: $20.47
Manton 306 Series 3 Pushrod Manton 306 - 1/2 x .120 Wall - Straight Pushrod

Manton Series 3 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing originally formulated for aerospace/aircraft use, the highest quality available from mills. They are a higher quality pushrod which provides approximately 170,000 psi tensile strength. Not recommended for use with hardened guide plates.

Our Price: $21.09
Manton 306-156 Series 3 Pushrod Manton 306-156 - 1/2 x .156 Wall - Straight Pushrod

Manton Series 3 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing originally formulated for aerospace/aircraft use, the highest quality available from mills. They are a higher quality pushrod which provides approximately 170,000 psi tensile strength. Not recommended for use with hardened guide plates.

Our Price: $21.93
Manton 307-156 Series 3 Pushrod Manton 307-156 - 9/16 x .156 Wall - Straight Pushrod

Manton Series 3 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing originally formulated for aerospace/aircraft use, the highest quality available from mills. They are a higher quality pushrod which provides approximately 170,000 psi tensile strength. Not recommended for use with hardened guide plates.

Our Price: $22.36
Manton 310 Series 3 Pushrod Manton 310 - 11/32 to 5/16 .120 Wall - Single Taper Pushrod

Manton Series 3 pushrods are made from hard drawn 4130/4135 seamless chromoly tubing originally formulated for aerospace/aircraft use, the highest quality available from mills. They are a higher quality pushrod which provides approximately 170,000 psi tensile strength. Not recommended for use with hardened guide plates.

Our Price: $22.58